GHL ProfiLux 3 EX Ultimate Pack
Includes:
- Profilux Plus III EX Controller
- 2 x 6 Outlet Digital Powerbar (PAB)
- Power Supply
- Temperature Probe
- PC Interface Cable
- 1 x GHL pH Probe
- Redox Probe
- Platinum Salinity Probe
- 2 x Optical Level Sensor
- Level Sensor Assembly
- 2m PAB Ethernet Cable
- Calibration Pack
ProfiLux 3 Technical overview
Functions &features (dependent on the available hardware)
• Measurement & control of pH-value, temperature, Redox, conductivity (salt or fresh water), oxygen, humidity, air temperature, all sensors are galvanically isolated.
• Seasonal temperature courses.
• Automatic calibration of all sensors.
• Auto top off, automatic water change, leakage detection.
• Illumination control for dimmable (1-10V-interfaces or DALI) and non-dimmable lamps, calendar-based moon phases, storms, also seasonally variable illumination possible including thunderstorm simulations using the GHL LED sticks and spots.
• AC dimmable ballast controllable eg Phillips advanced mark 10.
• Aqua Illumination compatible unlocking the true capabilities of the aqua illumination system.
• TMC Aqua Ray controllable.
• 8 x Tunze stream controllable with the addition of a single cable, no Tunze controller required. Tunze wave box controllable.
• Hydor Koralia 12v controllable using pump control-1 expansion box.
• Pump control for controllable and non-controllable pumps (see above), different pump groups with different settings, waves, ebb-flow, surge, random, sequences, shortest wave duration 0,4 s, therefore also suited for wave boxes .
• Dosing pump control, GHL dosing pump systems.
• Universal timers, shortest switching time 1s.
• Integrated web-server (display of values and configuration, remote programming), own website can be loaded, compatible with all current browsers.
• Integrated e-mail-client (sending of e-mails in case of an alarm).
• PIN-protection.
• Reminder functions.
• Optical and acoustic alarm.
• Feeding pause and maintenance function.
• Safety functions, e.g. redundant sensors, monitoring of the sensor function, value check.
• Due to simple software updates (device doesn’t need to be opened for this), always the newest functions are available.
• Large internal storage for measured values for all sensors, according to the setting, you can store measured values up to several years.
• Switch-on delay of sockets after blackout.
• Programmable logic.
• PC-software available for FREE.
• 100%-downwardly compatible: hardware of ProfiLux Plus II can be used further on (e.g. expansion cards, powerbars, ProfiLux View II).
• ProfiLux Plus II can be upgraded to ProfiLux 3, ProfiLux Plus II (eX) can be upgraded to ProfiLux 3 (eX) with an Upgrade-Kit.
• Connection of external display and operating units (ProfiLux View-PAB) possible, also several to one system.
• Internal clock keeps on running also during a blackout (Goldcap instead of battery, therefore no battery change necessary).
• All settings remain also during blackout.
• Universal analog (0 - 10 V) and digital inputs.
Hardware ProfiLux 3 (eX)
• 32Bit-controller – enough reserve of processing power and storage for future extensions
• Inputs for pH-value, temperature, 2 x level (ProfiLux 3 eX has additional inputs for redox, conductivity and one more level sensor).
• 2x expansion slots. Infinite further expansion with the PAB expansion box
• 4x 1-10V-interfaces with additional shut-off signals, dimmable electronic ballasts can be turned completely powerless at 0% (6x for ProfiLux 3 eX ).
• 2x connections for ProfiLux II-powerbars.
• LAN (WLAN compatible: if a wireless bridge is used, a wireless connection is possible).
• USB.
• 2x ProfiLux Aquatic Bus (PAB)-Interface.
• RS232-port, to connect a SMS-Module or a ProfiLux View, also suited for the connection to PCs, multimedia controller or house automation systems with RS232.
• Graphical blue/white display.
• Robust key pad.
Hardware Powerbar-PAB
• 6x separately switchable sockets each can be loaded with 15 AMP.
• Current measurement for all sockets.
• Safety switches in case of a failure of ProfiLux or PAB – sockets then overtake a preprogrammed state (on or off).
