GHL Direct - GHL Lighting Controllers Dimmers Profilux Online

Characteristics
Up to 4 sensors can be inserted into the sealed measurement chamber. The cell provides an optimal flow with a self-cleaning effect for the different sensors, this leads to a higher
life span of the sensors together with a lower maintenance effort.

Installation.

The measurement cell has to be looped into the return line (after the filter). In case of a loss of pressure or flow speed, the use of a bypass has to be considered. The measurement cell has to be positioned in a way that no pressure can build up inside the measurement cell, this could lead to a destruction of the sensors.

For the mounting of a sensor, the corresponding nut has to be loosened, the sensor is then inserted, afterwards the nut has to be tightened again. Sensor holes that are not used can be closed with the enclosed rods.

Technical data
Measurement cell for 4 sensors, non-pressurized operation
Diameter: 110 mm
In- and outlet: PVC, 20 mm
Sensor diameter: 12 mm
Cap O- ring sealed

Warranty
For this article, we issue a limited warranty of 1 year for manufacturing defects.